
Conducto-Lube Silver Lubricant
Pure silver in a grease. It lubricates switch and contact surfaces while lowering joint resistance, so the contact runs cooler and keeps moving freely.
- Pure silver · 3–4 µm
- No graphite
- No mercury
- No cyanide
- No silicone
- Non-toxic · Non-hazardous
Cool-Amp or Conducto-Lube?
Cool-Amp powder
Permanent silver plating for fixed, bolted joints on copper, brass and bronze.
Shop Cool-AmpConducto-Lube
Silver lubricant for contacts that move, open or come apart: blades, hinges, breakers, fuse holders.
Use both
Plate the surface with Cool-Amp, then apply Conducto-Lube to the moving interface.
How it works
Fills the gaps. Under magnification, mating metal touches only at its high spots. The 3–4 µm silver solids settle into the valleys, so current crosses more of the face. Over time they embed in the surface's imperfections and leave it very smooth.
Keeps it moving. The grease lubricates the contact so it doesn't gall, seize or lose clip tension under heavy cycling.
Stays stable. Resistance doesn't change appreciably with temperature, and there's no voltage limit.
Where it's used
Tested contact resistance
Average, 50–300 AMany joint compounds rely on zinc or graphite. Conducto-Lube carries pure silver, the most conductive metal and roughly 4× the conductivity of zinc.
Specifications
- Operating temperature
- −25 to 410 °F (−31 to 210 °C)
- Specific gravity
- 7.5
- Silver particle size
- 3–4 µm
- Voltage limit
- None
- Water
- Insoluble; wears slowly with long exposure
- Coverage
- 8 oz ≈ 3,840 in² (27 ft²)
- Sizes
- 1 · 2 · 4 · 8 oz
- Shelf life
- Indefinite in original container
- TCLP (hazardous waste)
- Silver leaching 98% below EPA limit
- NSN
- 9150-00-128-7200
From the field
Customer reviews · cool-amp.com“I cleaned a fuse holder & power entry module assembly, applied a dab of Conducto-Lube to the contacts… tested resistance. Good stuff!”
“Saving contacts that have burned… put the lube on the blades & reconnected the circuit… saved myself a lot of money.”
“Eliminates chloride salt build up at contact points. Conducto-Lube protects the contacts from vapors.”
“Prevents arcing where bus bars are bolted together. Very good conductor.”
“Works great in the spot welding process.”