Conducto-Lube Silver Lubricant

Conducto-Lube Silver Lubricant

8oz
$1,023.00
Skip to product information
Conducto-Lube Silver Lubricant

Conducto-Lube Silver Lubricant

$1,023.00
Size
Conducto-Lube Silver Lubricant is used on:

Connections, switches, hinge joints, breakers, RF transformers, and virtually anywhere a conductive lubricant/grease is needed. 
  • Contains Pure Silver 
  • Prevents Galling That Will Freeze Joints
  • Lubricates Switches 
  • Reduce Resistance
  • Prevent Data Errors
  • Prevent Power Interruptions 
  • Prevent Power Failures 
  • Provides Electrical & Thermal Conductivity Lubrication 
  • Prevents Clips of Disconnected Switches from Overheating & Losing Tension 
  • Increases Conductivity
  • Contains No Graphite, Mercury or Cyanide 
  • Temperature Range is -25-410 F 

Download the Cool-Amp Conducto-Lube Safety Data Sheet (SDS) PDF

  • Used on moving parts to provide lubrication & reduce joint resistance.
  • Contains no mercury, graphite or cyanide.
  • No voltage limits.
  • Not soluble in water, however it will gradually wear off if exposed to water for long periods of time.
  • Does not change conductivity, but will conduct electricity.
  • Resistance does not change appreciably with temperature.
  • Temperature range: -25 to 410 F (-31 to 260 C)
  • Specific gravity 7.5

Conducto-Lube eliminates the possibility of switches freezing under heavy usage.

Conducto-Lube is successful in reducing resistance in hinge joint and knife blade switches due to arcing because the solids in the lubricant eventually imbed themselves into the minute imperfections of the contact surface resulting in an extremely smooth surface.

The silver used has particles that are 3-4 microns in size.

8 ounces of Conducto-Lube will cover 3840 square inches (25 sq. ft.)

★ ★ ★ ★ ★

"I cleaned a fuse holder & power entry module assembly, applied a dab of Conducto-Lube to the contacts in the module & slid the fuse holder into place. Placed power module on test load bank, tested resistance. Good Stuff! Pass this on to whoever might be interested."

★ ★ ★ ★ ★

"Eliminates chloride salt build up at contact points. Conducto-Lube protects the contacts from vapors."

★ ★ ★ ★ ★

"Works great in the spot welding process."

★ ★ ★ ★ ★

"Saving contacts that have burned...put the lube on the blades & reconnected the circuit...saved myself a lot of money."

★ ★ ★ ★ ★

"Prevents arcing where bus bars are bolted together. Very good conductor."

★ ★ ★ ★ ★

"I have been using Cool-Amp to protect resistance welder connections from oxidation, since I was the Welding Engineer at Chevy Gear & Axle in 1976. It is now specified by most automotive customers for all the secondary welder connections."

Automotive Resistance Welding Specialist